That's all you need to test it! Now we clean the ballast and mount some double sided tape for mounting. Under the headlight is a plastic tray where the ballast will fit very nicely. We chose to put the ballast there, and put the connectors facing forward. You can also see this area if you look from the top of the truck and look down behind the headlight. Clean this tray area well and let it dry. Use strips of the 3m tape that comes with the kit. Click on some of the pictures to see exactly where I mounted mine.
Cinch everyting up where needed with the included zip ties, and repeat on the passenger side! Here's a few pics of the lights installed first two are with the drivers' HID and passenger halogen. Next two are with all the hid xenons's installed.
So we now have a great kit installed on the Titan. We took about 1 hour and that was going very slow and taking pictures. Just take your time, use a volt meter, and everything should be just fine!
http://www.swankmonkey.com/nissan/titan/2004/hids/