Audi A4 DIY: HID Conversion. The transformation from Halogen to Xenon

[hidusa]

Well here I am again on my first weekend home from school cause it's my brother's birthday. Anyways, decided to spend the afternoon in the shop where I can just relax with some tunes and work on my car.This time I bring to you an HID conversion kit that I bought off of ebay. The kit is a 3000k kit which means the color output is yellowish (perfect for fogs to cut through any weather out there). I did put this kit in my foglights because I use them way more than my highbeams/brights and I already have OEM xenons in my low beams.
This project was not that difficult at all. I would reccomend it to almost anyone as long as you feel comfortable taking out your headlights/foglights and using all the tools and materials listed!
Enough with the formalities.
Tools:
Drill
5/8 drill bit (I used a wood bit, any should do)
Dremel and sanding drum attachment (needs to fit in 5/8 hole)
Screw driver w/ phillips head (for fogs) and torx bit (for headlights)
At least a 6" extension for torx bit to reach 3rd screw in headlights
Wire stripper/wire cutters
Silicone sealant (small tube)
Electric tape
Other Materials:
Wire connectors
HID conversion kit...duh..
Ready to work..
First here are some before pictures...

Once it gets dark here on the crazy west coast I'll put night shots up

Oh I know...I'm pretty stoked too!!